ای آر پایانامه

 

مقاله Investigation of the Thermal, Mechanical and Physical Properties of ElastomerدرResin Mixtures Used As Friction Materials – Effect of Ingredients word دارای 12 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد مقاله Investigation of the Thermal, Mechanical and Physical Properties of ElastomerدرResin Mixtures Used As Friction Materials – Effect of Ingredients word کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.

این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Investigation of the Thermal, Mechanical and Physical Properties of ElastomerدرResin Mixtures Used As Friction Materials – Effect of Ingredients word ،به هیچ وجه بهم ریختگی وجود ندارد

---

بخشی از متن مقاله Investigation of the Thermal, Mechanical and Physical Properties of ElastomerدرResin Mixtures Used As Friction Materials – Effect of Ingredients word :

سال انتشار: 1385

محل انتشار: یازدهمین کنگره ملی مهندسی شیمی ایران

تعداد صفحات: 12

چکیده:

The purpose of friction brakes is to decelerate a vehicle by transforming the kinetic energy of the vehicle to heat, via friction, and dissipating that heat to the surroundings. As a part of commercial truck or automobile, brake materials have additional requirements, like resistance to corrosion, light weight, long life, low noise, stable friction; low wear rate and acceptable cost versus performance. In order to achieve the properties required of the brakes, most brake materials are not composed of single elements or compounds, but rather are composites of many materials. Even a difference of a percent or two of additive concentration can affect performance, so composition control is essential in these systems. Because of
this sensitivity, in this work, mechanical, physical and morphological properties of rubber-based composite friction materials have been performed. We have studied the influence of different proportions of curing agents, phenolic resin and the effect of different rubbers on the final properties of matrices used as friction materials. We have designed our experiments by using the Taguchi method in order to reduce the number
of experiments required. The mechanical and physical properties-such as tensile strength, elongation at break, hardness, swelling properties, degradation temperatures- and morphological behavior were studied. The most effective factors in variation of different properties were reported by analyzing of variance in the Taguchi method. Mechanical and physical properties of such systems were influenced predominantly by variation of resin and sulfur contents. In addition, NBR-based compounds showed higher properties than SBR-based ones.

 

 

کلمات کلیدی :