ای آر پایانامه

 

مقاله Applications of Nanoدرfluid Heat Transfer Enhancement for Nuclear Reactor word دارای 5 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد مقاله Applications of Nanoدرfluid Heat Transfer Enhancement for Nuclear Reactor word کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.

این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Applications of Nanoدرfluid Heat Transfer Enhancement for Nuclear Reactor word ،به هیچ وجه بهم ریختگی وجود ندارد

---

بخشی از متن مقاله Applications of Nanoدرfluid Heat Transfer Enhancement for Nuclear Reactor word :

سال انتشار: 1391
محل انتشار: اولین کنفرانس انتقال حرارت و جرم ایران
تعداد صفحات: 5
چکیده:

Colloidal dispersions of nano-particles are known as ‘nano-fluids’. Such engineered fluids provide the potential for enhancing heat transfer, especially boiling heat transfer, while avoiding such problems like erosion, settling, clogging that hindered the use of particle-laden fluids in the past, with the aim of assessing their benefits for and applicability to nuclear power systems particularly primary coolant, safety systems and severe accident mitigation strategies. Increasing the power produced per unit volume of the reactor core of operating and future Light Water Reactors (LWRs) is an effective approach to improve their economic attractiveness. Nucleate boiling is a very effective heat transfer mechanism. However, it is well known that there exists a critical value of the heat flux at which nucleate boiling transitions to film boiling, a very poor heat transfer mechanism may occur. In most practical applications it is imperative to maintain the operating heat flux below such critical value, which is called the critical heat flux (CHF). Obviously, a high value of the CHF is desirable, because, everything else being the same, the allowable power density that can be handled by a cooling system based on nucleate boiling is roughly proportional to the CHF. Depositing of nano-particles has a direct consequence of nano-boiling that enhances surface wettability so affected nucleation site density. In this article, nano-fluid’s boiling phenomenon has been modeled and the obtained relatives are compared with the available experimental data, moreover, theories of boiling have been studied.

 

 

کلمات کلیدی :