مقاله Dynamic Analysis of Tectonic Blocks 1 and 2 of Choghart Op

 

برای دریافت پروژه اینجا کلیک کنید

مقاله Dynamic Analysis of Tectonic Blocks 1 and 2 of Choghart OpenدرPit Mines under earthquake: A Case Study word دارای 8 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد مقاله Dynamic Analysis of Tectonic Blocks 1 and 2 of Choghart OpenدرPit Mines under earthquake: A Case Study word کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.

این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Dynamic Analysis of Tectonic Blocks 1 and 2 of Choghart OpenدرPit Mines under earthquake: A Case Study word ،به هیچ وجه بهم ریختگی وجود ندارد


بخشی از متن مقاله Dynamic Analysis of Tectonic Blocks 1 and 2 of Choghart OpenدرPit Mines under earthquake: A Case Study word :

سال انتشار: 1391
محل انتشار: نهمین کنگره بین المللی مهندسی عمران
تعداد صفحات: 8
نویسنده(ها):
Amin Azhari – MSc. Graduate Student from Yazd University, Department of Mining
Alireza Yarahmadi Bafghi – Assistant Professor, Department of Mining, Yazd University
Lohrasb Faramarzi – Assistant Professor, Department of Mining, Isfahan University of Technology

چکیده:

Rock slope stability for tectonic blocks 1 and 2 of Choghart open pit mine under sceismic load was analyzed in 3-D using the finite difference technique 3DEC. The seismic load was from the 2005 Bafgh Earthquake with 0.13g PGA and 57 sec. duration. The mine is divided into 4 blocks according to tectonic and rock mass properties. Blocks 1 and 2 have a slope angle of 50 degrees and are expected to fail in wedge and planar failure types, respectively. Rock joint propagation patterns in FD models were generated using statistical methods to try to represent their natural form. According to the results fromstatic analysis, blocks 1and 2 are stable with safety factors of 1.6 and 1.5, respectively. For dynamic analysis, 6 seconds of the earthquake wave with the highest accelerations were applied to the model at 0.005 sec. time steps with 0.5% damping. The results showed that block 1 is unstable with a safety factor of 0.8, whereas block 2 has a safety factor of 1.2 and is stable

 

 

برای دریافت پروژه اینجا کلیک کنید

کلمات کلیدی :